About International Standards for Mechanical Properties and Industrial Substances B

  NOTE: Factory-like conditions are designed to protect the glue joints from dirt and lead weathering, prevent any movement during curing and maintain the same temperature and relative humidity levels as a factory environment. This document also covers glue-in sticks in treated timber. This document does not cover glued in rods made from modified and stabilized timber with significantly reduced swelling and shrinkage. It does not cover glued-in rods in modified and stabilized wood with substantially reduced swelling and shrinkage properties, e.g., acetylated, heat treated, polymer impregnated wood, or preservative treated timber. These joints are for load-bearing timber structures that are in service classes 1 or 2 according to EN 1995-1-1 and are predominantly static or quasistatic according to EN 1990-1-1 and EN 1991-1-1. The joints can be used on load-bearing timber structures that are not exposed to prolonged temperatures exceeding 60 degrees Celsius. This standard is compatible with the technical base of your company if it's detailed determined where it can be used. You can ask a company that specializes in international criteria selection for advice and help you choose the right standard.   ___________________________________________________________________________________________________________________________________________________________________   Two-component epoxy and polyurethane adhesives for on-site repair of cracked timber structures- Testing, requirements and repair strength verification EN 17418:2021   ___________________________________________________________________________________________________________________________________________________________________   Evaluation methods are crucial for creating a productive system. We have already spoken about this topic many times. This stage can be performed in nearly every area of production. EN 17418-2021 is another important standard that governs test methods and their prerequisites. This document outlines the requirements and test methods for two-component epoxy or polyurethane adhesives to be used for the onsite repair and maintenance of cracks in timber timber structures made of strength-graded structural timber with rectangular cross section, structural finger-jointed timber, and glued solid timber. The fix adhesive is injected with a glue line thickness of up to 8mm.   ___________________________________________________________________________________________________________________________________________________________________   You can use the adhesive to repair cracks caused by nails, screws, dowel-type attachments, and dowels with threads. This section only addresses adhesives that meet the requirements of Clause 8. This document covers wood repair. This glue is intended for load bearing timber structures that are not subject to temperatures exceeding 60 degrees Celsius within a shorter period of time according to EN 1995-1-1. These structures can be loaded predominantly static or quasi-static. For more information, see EN 1990-1-1 and EN 1991-1-1.   ___________________________________________________________________________________________________________________________________________________________________   We recommend that you visit the link to the website to learn more about the available records. This is likely to be the place where you'll find standards that can help improve your business's systems.   ___________________________________________________________________________________________________________________________________________________________________   Plastics- Determination of dynamic mechanical properties- Part 3: Flexural vibration- Resonance-curve method (ISO 6721-3:2021) EN ISO 6721-3:2021   ___________________________________________________________________________________________________________________________________________________________________   Plastic is being reduced in modern times because it has negative environmental effects. Nevertheless, EN ISO 6721-3:2021 is one of many regulatory acts that are being developed to regulate the activities that come in contact with this substance. This document describes a bending vibration method that uses resonance curves to determine the flexural complex modulus of homogeneous polymers. It also includes damping properties for laminated plastics intended for acoustic insulation material. These properties can be used to calculate temperature and frequency for many functions. ___________________________________________________________________________________________________________________________________________________________________       We strongly recommend having this standard on hand in case your actions come in direct or indirect contact with any of the above mentioned equipment and materials. This will ensure that your system is in line with global market requirements. This is what will keep you at the forefront of your industry.   ___________________________________________________________________________________________________________________________________________________________________   It is important to have global standards within an organization   ___________________________________________________________________________________________________________________________________________________________________   Global standards may seem only necessary for local manufacturers and businesses at first glance. However, globalization is becoming a more prominent trend. It is possible to improve a company's competitiveness by preparing for international markets in advance. We are happy to assist you in selecting international documents that will be acceptable for your business or organization.
Go to Top